Sheet L Bracket
Bent L-bracket in sheet steel: a base with two slotted mounting holes, an upright flange with a hole pattern, and a short return lip for stiffness. Besides the folded part, the build gives the flat pattern (outline on "cut", bend lines on "bend", "UP 90° R2" notes on "engrave"):
examples/sheet-l-bracket.tsx on GitHub
bunx tscad dev examples/sheet-l-bracket.tsx/**
* Bent L-bracket in sheet steel: a base with two slotted mounting holes, an upright flange with
* a hole pattern, and a short return lip for stiffness. Besides the folded part, the build
* gives the flat pattern (outline on "cut", bend lines on "bend", "UP 90° R2" notes on
* "engrave"):
*
* tscad build examples/sheet-l-bracket.tsx -o bracket.dxf
*/
import { defineParams, type ParamValues } from "tscad"
export const params = defineParams({
width: { type: "number", default: 60, min: 30, max: 200, step: 1, unit: "mm", label: "Width" },
base: { type: "number", default: 40, min: 20, max: 120, step: 1, unit: "mm", label: "Base depth" },
height: { type: "number", default: 50, min: 20, max: 150, step: 1, unit: "mm", label: "Upright height" },
thickness: { type: "number", default: 2, min: 0.5, max: 6, step: 0.1, unit: "mm", label: "Thickness" },
bendRadius: { type: "number", default: 2, min: 0.5, max: 10, step: 0.1, unit: "mm", label: "Bend radius" },
lip: { type: "number", default: 8, min: 0, max: 30, step: 0.5, unit: "mm", label: "Return lip" },
hole: { type: "number", default: 5.5, min: 2, max: 12, step: 0.1, unit: "mm", label: "Hole Ø" },
})
export default function LBracket(p: ParamValues<typeof params>) {
const holes = Math.max(1, Math.floor((p.width - 20) / 20) + 1)
const pitch = holes > 1 ? (p.width - 20) / (holes - 1) : 0
return (
<part name="l-bracket" material="steel">
<sheetMetal name="l-bracket" thickness={p.thickness} bendRadius={p.bendRadius}>
<flange>
<rect w={p.width} h={p.base} />
{/* slotted mounting holes in the base */}
{[-1, 1].map((s) => <slot length={p.hole * 2.5} width={p.hole} x={(s * p.width) / 4} y={-p.base / 6} />)}
<edgeFlange edge="+y" length={p.height}>
{/* a row of holes up the flange (x along the bend, y up from it) */}
{Array.from({ length: holes }, (_, i) => <circle d={p.hole} x={10 + i * pitch} y={p.height * 0.6} />)}
{p.lip > 0 && <edgeFlange edge="end" length={p.lip} direction="down" />}
</edgeFlange>
</flange>
</sheetMetal>
</part>
)
}