Gallery
Every example model in the repository, rendered by tscad's headless renderer. Each opens in the playground with its parameters.

Assembly Arm
A two-link robot arm: a turntable on a base, an upper arm and a forearm, each a component exposing joint anchors. Revolute mates driven by the angle params pose it, with no transforms computed by hand.

Assembly Hinge Box
Hinged box: a shelled base and a lid joined by a revolute mate along the back edge. The open param drives the hinge angle: drag it and the lid swings.

Bolt and Nut
ISO-style hex bolt and nut, sized from the metric thread table. The hex heads get the classic 30° chamfer by intersecting the prism with a double cone; the shank is a single revolved profile with cosmetic V-grooves for the thread.

Bracket
L-shaped mounting bracket: a filleted base plate and upright joined by a gusset, with a parametric grid of mounting holes in the base and a slot pair in the upright.

Cable Clip
Cable clip: a C-shaped clip that snaps over a cable, with a screw tab. One extruded sketch: the ring and the tab are disjoint outlines that meet, so they're cut and joined in one go.

Coaster
Honeycomb coaster: a round puck with a raised rim, a field of hexagonal pockets laid out on a staggered grid (only the cells that fit inside the rim), and a filleted top edge.

Component Library
"It's just React": a tiny library of reusable, typed function components (a standoff, a countersunk hole, a rounded plate) composed into a Raspberry-Pi-style mounting plate. Components take props, compute with plain TypeScript, map over arrays and return JSX.

Enclosure
Electronics enclosure: a rounded tub with screw bosses in each corner, vent louvres and countersunk screws in the lid, and a USB-C cut-out: an assembly of two parts (body + lid). Set exploded to lift the lid off for printing / inspection.
Engraved Logo
Engraved coaster: a round puck with a rounded top edge and an SVG logo engraved into it. The logo is plain SVG text, imported with with { type: "text" } and used as a 2D shape: its arcs stay exact arcs, its holes come from the SVG's fill rule, and center puts it in the middle.

Fasteners
Standard hardware from tscad/parts: a bearing block bolted to a base plate. The plate gets its holes from each bolt's own clearance cutter, the 608 bearing sits in a pocket, and a shaft collar, washers and nyloc nuts complete the stack. Every size comes from ISO tables.

Hinge
Pin hinge: two leaves with interleaved knuckles and a pin, assembled with revolute mates. limits keeps the hinge between 0° and 180°; driving it past them warns at the mate.

Laser Box
Laser-cut box: a finger-jointed box from sheet material, with an optional lid and dividers. assembled folds the panels into the box (to see it and check the joints); either way tscad build examples/laser-box.tsx -o box.dxf writes the cutting file (panels on layer CUT, engraved labels on layer ENGRAVE).

Parts Showcase
The tscad/parts library in action: a NEMA 17 motor mount plate with counterbored M3 screws and a pilot bore, next to a Raspberry Pi 4 base with M2.5 standoffs, a nut trap and an engraved label. Parts are just components: import them like any npm package.

Phone Stand
Desk phone stand: a side profile sketched as a polygon, extruded to width, with all the long edges rounded, a cable pass-through slot and a lip that holds the phone at angle.

Pi5 Case Auto
Raspberry Pi 5 case, generated from the board's data: standoffs on its mounting holes, an opening wherever a connector faces a wall (with plug clearance and a chamfer), and a vented lid with a GPIO slot. The board is mated onto the standoffs, so tscad_check interference proves it fits. Swap board for a Pi 4, Zero 2 W, Pico, Arduino Uno or ESP32-DevKitC.

Refs Bracket
Refs: a mounting plate built by naming solids and operating on them from outside. Two library bolt cutters drill counterbored holes (<subtract from tool>), and the plate is rounded by <fillet target> after the cuts, with no restructuring of the tree around it.
Sheet Chassis
Electronics chassis tray: a base with ventilation slots and standoff holes, four walls folded up with closed (mitred) or overlapped corners and round corner reliefs, a connector cut-out in the back wall, and tapered mounting tabs folded out along the side walls. Build the flat pattern (cut, bend lines + notes, engrave) for the laser and the brake:
Sheet L Bracket
Bent L-bracket in sheet steel: a base with two slotted mounting holes, an upright flange with a hole pattern, and a short return lip for stiffness. Besides the folded part, the build gives the flat pattern (outline on "cut", bend lines on "bend", "UP 90° R2" notes on "engrave"):
Sketch Coat Hook
Coat hook: a rounded wall plate with two countersunk screw holes, and a round rod swept along a constraint-sketched path: straight out from the wall, a tangent bend upwards, a straight tip. The path is drawn in the YZ plane; the rod's profile is placed square to the path's start automatically.
Sketch Flange
Pipe flange with two mounting lugs, drawn as one constraint sketch: - the right lug is drawn once (two lines tangent to the flange circle and to the lug's end arc) and mirrored with <mirrorEntities>, so both lugs stay identical as params change; - the bolt circle is one hole and a <circularPattern>, its copies tied by rotation constraints rather than computed coordinates.

Sketch Link Arm
Link arm drawn as a constraint sketch: two bosses joined by lines tangent to both, a bore in each boss and an adjustment slot between them. Nothing is computed by hand: the outline's tangent points come out of the solver, and every dimension is a param. Written with typed handles (sketchRefs) instead of string ids.
Sketch On Face
Sketch on face: a bearing block built feature by feature, each one drawn on a face of the solid so far: no coordinates computed for where the faces end up. - a boss raised on the top face, with the bearing pocket and a through bore in it; - four counterbored mounting holes, a constraint sketch with a circular pattern; - a wire slot pocketed into the front face.

Sketch Pulley
V-belt pulley: the half cross-section is a constraint sketch (x = radius, y = axial), revolved about Z. The lower half is dimensioned from the axis; the upper half is a mirror image through symmetric constraints, so the groove stays centred whatever the params.
Sketch Vase
Lofted vase: three constraint-sketched sections (a rounded square at the foot, a wider belly, a narrow neck) skinned smoothly and hollowed out from the top.

Snap Box
Snap-fit box: a rounded tub and a lid whose lip carries a snap bead that clicks into a groove inside the rim. The lid is placed by a fastened mate (lid seated on the rim); set exploded to lift it off. Clearances come from <offset> on one shared outline.

Spur Gear
Involute spur gear: the tooth flanks are computed from the involute of the base circle, so any two gears with the same module and pressure angle mesh correctly.

Vase
Lathe-turned vase: a smooth spline profile revolved about Z, then shelled from the top. The silhouette is driven by four radii: tweak them and watch the curve follow.

Wall Hook
Wall hook: a J profile drawn as SVG path data (lines and an exact arc), extruded, with countersunk screw holes in the back plate. Print it on its side: no supports.