Sketch Pulley

V-belt pulley: the half cross-section is a constraint sketch (x = radius, y = axial), revolved about Z. The lower half is dimensioned from the axis; the upper half is a mirror image through symmetric constraints, so the groove stays centred whatever the params.
examples/sketch-pulley.tsx on GitHub
bunx tscad dev examples/sketch-pulley.tsx/**
* V-belt pulley: the half cross-section is a constraint sketch (x = radius, y = axial),
* revolved about Z. The lower half is dimensioned from the axis; the upper half is a mirror
* image through `symmetric` constraints, so the groove stays centred whatever the params.
*
* tscad dev examples/sketch-pulley.tsx
*/
import { defineParams, type ParamValues } from "tscad"
export const params = defineParams({
diameter: { type: "number", default: 80, min: 30, max: 200, step: 1, unit: "mm", label: "Outside Ø" },
width: { type: "number", default: 20, min: 8, max: 60, step: 0.5, unit: "mm", label: "Width" },
bore: { type: "number", default: 10, min: 3, max: 40, step: 0.5, unit: "mm", label: "Bore Ø" },
hub: { type: "number", default: 26, min: 8, max: 80, step: 0.5, unit: "mm", label: "Hub Ø" },
rimThickness: { type: "number", default: 14, min: 6, max: 40, step: 0.5, unit: "mm", label: "Rim (radial)" },
web: { type: "number", default: 6, min: 2, max: 30, step: 0.5, unit: "mm", label: "Web thickness" },
grooveAngle: { type: "number", default: 38, min: 20, max: 60, step: 1, unit: "°", label: "Groove angle" },
grooveDepth: { type: "number", default: 8, min: 2, max: 20, step: 0.5, unit: "mm", label: "Groove depth" },
grooveBottom: { type: "number", default: 4, min: 1, max: 20, step: 0.5, unit: "mm", label: "Groove bottom width" },
})
/** Lower-half points and their mirror images across the mid-plane. */
const PAIRS = [["b0", "b1"], ["h0", "h1"], ["w0", "w1"], ["k0", "k1"], ["r0", "r1"], ["o0", "o1"], ["g0", "g1"], ["q0", "q1"]] as const
export default function Pulley(p: ParamValues<typeof params>) {
const R = p.diameter / 2
// keep the section valid whatever the sliders say: bore < hub < rim < diameter, the groove
// inside the rim, the web inside the width
const hub = Math.min(p.hub, p.diameter - 8)
const bore = Math.min(p.bore, hub - 4)
const rim = Math.max(2, Math.min(p.rimThickness, R - hub / 2 - 2))
const tanHalf = Math.tan((p.grooveAngle * Math.PI) / 360)
const depth = Math.min(p.grooveDepth, rim - 1.5, (p.width - 1.5) / (2 * tanHalf))
const grooveBottom = Math.max(0.5, Math.min(p.grooveBottom, p.width - 1 - 2 * depth * tanHalf))
const web = Math.min(p.web, p.width - 1)
return (
<part name="pulley" material="aluminum">
<revolve>
<sketch>
<point id="axis" x={0} y={0} fixed />
<point id="mid" x={0} y={p.width / 2} fixed />
{/* lower half, from the bore outwards: hub, web, rim, groove flank */}
<point id="b0" x={bore / 2} y={0} fixed />
<line from="b0" to="h0" horizontal />
<line from="h0" to="w0" vertical />
<line from="w0" to="k0" horizontal />
<line from="k0" to="r0" vertical />
<line from="r0" to="o0" horizontal />
<line from="o0" to="g0" vertical />
<line id="flank" from="g0" to="q0" angle={180 - p.grooveAngle / 2} />
<line id="bottom" from="q0" to="q1" />
<dimension a="q0" b="q1" dy={grooveBottom} />
<horizontal a="b0" b="o0" />
{/* dimensions from the axis */}
<dimension a="axis" b="h0" dx={hub / 2} />
<dimension a="axis" b="o0" dx={R} />
<dimension a="k0" b="o0" dx={rim} />
<dimension a="q0" b="o0" dx={depth} />
<dimension a="axis" b="w0" dy={(p.width - web) / 2} />
{/* upper half: mirror images, joined back up */}
{PAIRS.map(([a, b]) => <symmetric a={a} b={b} about="mid" axis="y" />)}
<line from="q1" to="g1" />
<line from="g1" to="o1" />
<line from="o1" to="r1" />
<line from="r1" to="k1" />
<line from="k1" to="w1" />
<line from="w1" to="h1" />
<line from="h1" to="b1" />
<line from="b1" to="b0" />
</sketch>
</revolve>
</part>
)
}